Curved Column Line Revit Not Seen On Other Floors

Ami out of luck or is there some trick i don t know yet.

Curved column line revit not seen on other floors. If the view range intersects the geometry of a level in your main view that level cannot be used as an underlay in the main view. To check click the worksets icon in the collaborate tab. This is related to the auto detect settings for the column s analytical model and also the tolerances set in structural settings. If not apologies in advance.

It follows the below procedure. Ensure the link is loaded. Doubly curved surfaces generated by slab shape points are not supported. When you tried to underlay a floor only doors and windows were visible.

Ensure the link is visible in the view. An even more bizarre example is where a revit floor will disregard your view depth and show anyway as long as it is within an arbitrarily picked range of 4 feet of your bottom clip. See unload and reload linked models. First post here and i hope i am in the right place.

Konstru will store split lines and slab shape points but represent the floor outline only. If your model in place intersects the cut plane at even just one point it ll show the entire model regardless of whether or not the other parts should be seen. To see if this is the problem toggle on the reveal hidden elements tool. Verify that the element is not hidden by a masking region or a filled region.

Those floors will be ignored entirely. See masking regions and filled regions. Thank you all kindly. Is your grids workset opened in the project.

See override individual lines in an element. If the element is part of a linked file do the following. Getting such information is not generally as easy as just getting a location curve. In plan view click view menu view properties.

Verify that your grids workset display yes in the opened column. Structural analytical lines are not centered on columns when grade beams are off center. To prevent the floor or slab from being visible in plan view you need to adjust the bottom clip so that it is more than 4 feet above the floor or slab and set the view depth so that it does not include any part of the floor or slab. In the main floor level the bottom of the primary range is set to main floor with an offset of 1.

This issue occurs because there is an incorrect view range in the main view. For vertical columns you can derive end points via level parameters and offsets. If you see the missing grid select it right click and choose unhide in view. A slanted column on the other hand is equipped with a location curve.